Description: Binani Chopped Strand Mat is made of randomly, yet evenly distributed strands, chopped from continous "E" - glass fibres into 50 mm length, bonded with "emulsion binder", possesses excellent surface bonding efficiency.
Properties:
Easy air removal and rapid resin impregnation.
Drapes well to suit the surface of intricate moulds.
Fast wet-through and wet-out due excellent Styrene solubility of binder.
Easy handling and better appearance of the composite parts.
Good surface bonding and high strand integrity. Compatible with Unsaturated Polyester resins.
Approvals: Major National and International product accreditations.
Characteristics: Conforming to:- BS:3496
Characteristics
Limits
Nominal Value
225g/m2
300g/m2
375g/m2
450g/m2
600g/m2
900g/m2
Width (cm)
+3, -0
100
100
100
100
100
100
Average mass / area (gsm)
± 8%
225
300
375
450
600
900
Moisture content %
0.20 max
0.20 max
0.20 max
0.20 max
0.20 max
0.20 max
0.20 max
Loss on Ignition %
± 2%
5.0
5.0
5.0
4.0
4.0
4.0
Strand Length (mm)
± 2
50
50
50
50
50
50
Strand Tex (g/Km)
± 2
32
32
32
32
32
32
Wet-out Time (Minutes)
± 2
3.5
3.5
4.0
4.0
4.5
5.0
Filament Diameter (Microns)
± 2
11
11
11
11
11
11
Roll Lengths (Meters)
± 5
110
100
85
65
50
40
Roll Weight (Kilos)
± 5
30
30
30
30
30
30
Pallet Weight (Kilos) Nett
± 20
480
480
480
480
480
480
# Other densities and widths available on request, e.g. 95, 125, and 150cm. Normally supplied with one trimmed edge.
Packaging:
Each roll is wound on cardboard tubes 10cm internal diameter x mat length.
Each roll is covered in polyethylene bags and packed in Corrugated cartons (27cm x 27cm) x standard length.
16 cartons per pallet are packed vertically, with stretch wrap protection.
Pallet dimensions are 110cm. x 110cm.
Storage:
Rolls should be protected from sun and to be stored vertically.
